Date |
Details |
January
9 |
Lecture: Introduction; Chapter 2: Ohm's law, KVL, KCL |
January 10 |
Introduction to Lab
Introductory Session
Introductory 2 |
January
11 |
Chapter 2:
Read all Examples (2.1-2.14) |
January
16 |
Lecture: Chapter 3
(Read Examples: 3.5)
Nodal and mesh analysis |
January 17 |
Lab 1 (Simulation: Multisim) Experiment 1:
Simulation
Exercises Using MULTISIM.
Part 1
Simulation
Exercises Using MULTISIM.
Part 2 |
January
19 |
DGD on Chapter 2 and 2:
Solve Problems: 2.32; 2.52; 2.59; 2.66; 2.75;
3.1; 3.3; 3.4; 3.7 |
January 23 |
Chapter 3: Nodal and Mesh Analysis (Read
Examples: 3.6; 3.8; 3.10) |
January 24 |
Lab 1 (Simulation: Multisim) Experiment 1 |
January 26 |
Quiz 1: Chapter 2 and 3
(Solve: Problems 2.68; 2.69; 3.7; 3.9; 3.11; 3.18; 3.26)
|
January 30 |
Lecture: Chapter 4 (Read Examples 4.14;4.16;4.17;4.18;4.20)
Chapter 4 |
January 31 |
Lab 2 (Hands-on): Experiment 2 (Multisim work should be
submitted) |
February 2 |
Lecture: Chapter 5 (Sections:5.1-5.4); Read
Example: 5.8:
Activity on Charging AC Circuit |
February 6 |
Lecture: Chapter 4 (You may read examples 4.14;4.16;4.17;4.18;4.20) Chapter 4 Tutorial on
Chapter 4 (4.54; 4.55; 4.56; 4.57;4.60) |
February 7 |
Lab 2 (Hands-on): Experiment 2 (Multisim work should be
submitted) |
February 9 |
Example 7.1; Example 7.2; Example 7.3
Activity on Complex Power
Activity on Power Factor |
February 13 |
Lecture: Chapter 7 (7.1, 7.2)
Chapter 7
Read Examples 7.1-7.11:
Activity on Apparent Power Example 7.5; Example 7.8; Example 7.10
You
may read Chapter 4, 5, and 7 (Solve: 4.56;
4.57; 5.22; 7.26; 7.28; 7.31); Ch3, 4, 5, 7
|
February 14 |
Lab 3 (Hands-on): Experiment 3 |
February 16 |
Midterm 1: Chapters 2; 3; 4; 5; and 7. |
February 27 |
Chapter 7: Transformer (Transformer) (Power Systems) |
February 29 |
Lab 3 (Hands-on): Experiment 3 |
March 1 |
Chapter 18 (Principles of Electromagnetics): Read Sections
18.1; 18.2; 18.5; Examples: 18.2; 18.3; 18.4 |
March 5 |
Chapter 19 (19.1-19.3) (Examples 19.1-19.5)
|
March 6 |
Special Lab on Project (Present your Proposal
to your TA): 3 marks |
March 8 |
DC Machines: Read Examples 19.1-19.7
Armature reaction;
Basic DC motor construction;
Fundamental DC motor;
The DC motor;
Series motor;
Shunt motor; Example 19.6;
Example 19.7; Example 19.8. |
March 12 |
Example 19.6; Example 19.7; Example 19.8 |
March 13 |
Project Progress 2: 3 marks |
March 15 |
Control of DC Machines |
March 19 |
Chapter 19 (19.5-19.6) (Examples
19.10-19.14) Synchronous
Machines Ch17 (old version of the book)
Synchronous motors
The AC Generator: Examples 19:10 and 19:11. |
March 20 |
Project Progress 3: 3 marks |
March 22 |
Chapter 19 (19.8): Induction Machines Ch17;
Induction motor slip;
Stator field;
The wound rotor motor;
Torque of induction motor;
Induction Machines Ch17 Electric Utility Ch18 |
March 26 |
Review for the Second Midterm |
March 27 |
Project Progress 4: 3 marks |
March 29 |
Midterm 2 (Chapter 18 and 19):
Read Examples: 18.2; 18.3; 18.4; Examples 19.6; 19.7; 19.8;
19.10; 10.11; 19.12; 19.13. |
April 2 |
Chapter 20 (20.1, 20.2, 20.4, 20.5) (No Examples)
Special Motors |
April 3 |
Project Final Demonstration: 3 marks |
April 5 |
Review for the Final Exam |
|
Experiment
5: Simulation using SIMULINK; (Tutorial:
SIMULINK) |
|
Final Exam |
|
Lab 4 (Simulation): Experiment 4 (Matlab Tutorial 1;
Matlab
Tutorial 2) |
|
Experiment
5: Simulation using SIMULINK; (Tutorial:
SIMULINK) (Solution) |